Veröffentlichungen

  1. Kaiser, T. Pyttel, and F. Duddeck. Coupling of an explicit and implicit finite ele-

ment model to simulate the draping behavior of a plain-woven fabric. GAMM2018

- 89th GAMM Annual Meeting of the International Association of Applied Mathe-

matics and Mechanics Munich, Germany, 19-23 th March 2018, 2018

  1. Kaiser, T. Pyttel, E. Haug, and F. Duddeck. Draping simulation with a new

finite element formulation involving an internal unit cell. ESAFORM2017 - 20th

International ESAFORM Conference on Material Forming Dublin, Ireland, 26-28 th

April 2017, 2017

  1. Kaiser, T. Pyttel, E. Haug, and F. Duddeck. A finite element model for plain weave

fabric based on an inner beam structure. ECCM17 - 17 th European Conference

on Composite Materials Munich, Germany, 26-30 th June 2016, 2016

  1. Kaiser, E. Haug, T. Pyttel, and F. Duddeck. A multi-scale approach for the simu-

lation of textile membranes. VII International Conference on Textile Composites

and Inflatable Structures - STRUCTURAL MEMBRANES 2015, Barcelona Spain,

2015

Pyttel T., Hühn D.: Experimental and numerical Methods for the parameter identification of constitutive models of plastics, Proceedings of the CAE–Challenge (carhs), Hanau, 2014

Pyttel T., Liebertz H., Cai J.: Non-local failure criterion for laminated glass under impact loading, Proceedings of the CAE–Challenge (carhs), Hanau, 2013

Berger A., Kaiser B., Pyttel T.: Process Simulation and Numerical Homogenisation

– A Method for the Determination of Constitutive Parameters of Fibre Reinforced Composites, NAFEMS Seminar: Fortschritte in der Simulation von Composites, 2011

Pyttel T., Liebertz H., Cai J.: Failure Criterion for Laminated Glass under Impact Loading and its Application in finite Element Simulation, International Journal of Impact, Volume 38, pages 252-263, 2011

Liebertz H., Pyttel T.: Ein neues Bruchmodell für Verbundglasscheiben, VDI-Konferenz SIMVEC, Baden Baden, 2010

Pyttel T., Lieven E., Köser O.: Simulation des mechanischen Verhaltens von Gussbauteilen unter Berücksichtigung des Herstellungsprozesses, DVM Tagung „Neue Entwicklungen für die Bauteilfestigkeitsnachweise“, 2010

Lieven E., Wuth M., Köser O., Pyttel, T.: Coupling of Casting and Structure Simulation and Integration into the Development Process to Improve the Prediction of Component Performance, Proceedings of the 69th World Foundry Congress, Hangzhou China, 2010

Pyttel T., Thibaud C., Berger A.: Modelling of Plastics – Mechanical Behaviour, Proceedings of the CAE–Challenge (carhs), Hanau, 2010

  1. Boesch, C. Pereira, R. John, T. Schmidt, K. Seifart, H. Sparr, J. M. Lautier , T. Pyttel: Ultra Light Self-Motorized Mechanism for Deployment of Light Weight Space Craft Appendages, Proceedings of the 39th Aerospace Mechanisms Symposium, NASA Marshall Space Flight Center, May 7-9, 2008

Pyttel T., Berger A., Kölsch D.: Ein prognosefähiges Simulationsmodell für die

Auslegung von Reißnähten in Airbagcovern,VDI-Konferenz SIMVEC, Baden Baden, 2008

Pyttel T., Lieven E., Wuth M.: Kopplung von Guss- und Struktursimulation und Integration in den Entwicklungsprozess zur verbesserten Bewertung der Bauteileigenschaften,VDI-Konferenz SIMVEC, Baden Baden, 2008

Pyttel T., Floss A., Thibaud C., Goertz C.: “Realistic Simulation Models for Airbags and Humans - New Possibilities and Limits of FE Simulation”, International Journal of Crashworthiness, Volume 12, Issue 5, pages 481-492, 2007

Pyttel T.,Sholapurwalla, A., Scott, S., Koeser, O., Lieven, E.: “Reinventing the Wheel”, Die Casting Engineer, No 2, 2007

Culiere, P., Wang, A., Pyttel T., Schlosser, J.: “Two Candidate Solutions for Improved Modeling Honeycomb Barriers”, EuroPAM, Toulouse, 2006

Pyttel T., Floss A., Thibaud C., Goertz C.,: “Realitätsnahe Simualtionsmodelle für Airbag und Mensch – Neue Möglichkeiten und Grenzen der FE-Simulation“, VDI Berichte Nr. 1911, 2005

Pyttel T., Pickett A., Werner H., Christlein J., Liebertz H.: “Failure Modelling for Chrashworthiness Simulation“, 36. Tagung des DVM Arbeitskreises Bruchvorgänge, 2004

Pickett A.K., Pyttel T., Lauro F., Petrinic N., Werner H., Christlein J. : “Failure Prediction for Advanced Crashworthiness of Transportation Vehicles”, International Journal of Impact, volume 30, pages 853-872, 2004

Jevons M., Pyttel T.: “Drape Simulation of Non Crimped Fabric – A Wing Spar Study “, Proc. of EUROPAM, Paris (France), 2004

Dohr E., Eichberger A.,Pyttel T.: “Development of an FEM-Simulation-Procedure for an Effective Design of the Vehicle Structure for a Rollover Load case” Proc. of EUROPAM, Paris (France), 2004

Michalke W., Heym A., Pyttel T.: “Investigating the Finite Point Method for Numerical Simulation of OoP-Situations”, Proc. of EUROPAM, Paris (France), 2004

Pickett A.K., Pyttel T., Payen F.: “Failure Modelling of metals and welded joining systems”, Proc. of HANPAM, Seoul (Korea), Proc. PUCA, Tokio (Japan), 2004

Pyttel Th. and Weyer S.: “Plastics in Crashsimulation - Constituitve Equations and Application”, Proc. of Computational Plasticity VII. Fundamentals and Applications Barcelona, 2003

Pickett A., Pyttel Th., Payen F. and Bernauer G.: “Improved Failure Modelling for Crashworthiness Simulation”, Proc. of Computational Plasticity VII. Fundamentals and Applications, Barcelona, 2003

Pyttel T., Weyer S.: “Crash simulation with glassy Polymers – constitutive model and application”, International Journal of Crashworthiness, volume 8, No 5, pages 433-442, 2003

Payen F., Pyttel T.: “Modelling of fracture and crack propagation with shell-solid coupling and element splitting”, Proc. of EUROPAM 2003 (Germany), 2003

Robin V., Pyttel T. Christlein J., Strating A.: “Fracture Analyses of Welded Components”, Proc. of the 7th International Seminar of Numerical Analysis of Weldability (Austria), 2003

Pyttel Th.: “Development and Validation of the FAT finite element model for the side impact dummy EUROSID-1”, International Journal of Crashworthiness, volume 7, No 2, pages 207-217, 2002

Shuqin, X., Hoogen, M., Pyttel T., Hoffmann, H.: „FEM simulation and experimental research on the AlMg4.5Mn0.4 sheet blanking”, Journal of Materials Processing Technology, volume 122, No 2-3, pages 338-343, 2002

Pickett, A.K., Payen F., Pyttel Th.: “Failure and Fracture Prediction of Materials for Crash Simulation”, Proc. of HANPAM 2001, Seoul (Korea), 2001

Pyttel Th.: „Gekoppelte FEM-MKS Berechnungen mit PAM-SOLID; Möglichkeiten und Anwendungen“, Vortrag im Haus der Technik anlässlich der Tagung „Dynamische Gesamtfahrzeugmodelle in der Fahrzeugentwicklung“, Essen, 2000

Pyttel Th.: “Development and Validation of a Finite Element Model for the Side Impact Dummy EuroSid”, Proc. of ISATA 2000, Dublin (Ireland), 2000

Pyttel Th., John R., Hoogen M.: “A finite element based model for the description of aluminium sheet blanking”, International Journal of Machine Tools & Manufacture, volume 40, issue 14, pages 1993-2002, 2000

Pyttel Th., LeRenard A.: “Development and Validation of the Finite Element Models for the Side Impact Dummies EUROSID-1 and USSID”, Proc. of AMERIPAM 2000, Detroit (USA), 2000

Pyttel Th., LeRenard A.: “Final Validation of the FAT Finite Element Models for the Side Impact Dummies EUROSID-1 and USSID”, Proc. of HANPAM 2000, Seoul (Korea), 2000

Pyttel Th., LeRenard A.: “Final Validation of the FAT Finite Element Models for the Side Impact Dummies EUROSID-1 and USSID”, Proc. of PUCA, Tokio (Japan), 2000

Pyttel Th., Ulbricht V., John R.: “Nonlinear shell theory with deformation dependend anisotropic plasticity”, Archives of civil engineering, XLV, 2/1999

Hoogen M., Pyttel Th., Hoffmann H.: „Weniger Flitter, weniger Ausschuss“, Werkstatt und Betrieb, 10, 1999, Jahrgang 132

Pyttel Th.,Ulbricht V., John R.: „Geometrisch und physikalisch nichtlineare Schalentheorie in konvektiver Beschreibung unter Berücksichtigung anisotropen Materialverhaltens“, Zeitschrift für Angewandte Mathematik und Mechanik 78, 1998, S2

John R., Pyttel Th.: „Deformationsgesetz für große elastisch-plastische Formänderungen und anisotropes Materialverhalten in konvektiver Beschreibungsweise“, Zeitschrift für Angewandte Mathematik und Mechanik 78, 1998,S2

Ulbricht V., Pyttel Th., John R.: „Nichtlineare Schalentheorie in konvektiver Beschreibung mit anisotroper Plastizität“, Technische Mechanik, Band 18, Heft 3, 1998, 189-196

John, R., Pyttel Th., Ulbricht V.: „Nichtlineare Schalentheorie mit plastischer Anisotropie“, Mitteilungen aus dem Institut für Mechanik, Nr. 114, Ruhr Universität Bochum, 1998

Pyttel Th., Ulbricht. V.: „Numerische Simulation des Zerteilens von Aluminiumblech“, Wissenschaftliche Zeitschrift der Technischen Universität Dresden, 47, 1998, Heft 2

Pyttel Th., Hoogen M.: „Simulation des Scherschneidens von Aluminiumblech“, Blech Rohre Profile, Ausgabe 9, 1998, Meisenbachverlag

Pyttel Th., Ulbricht V., John R.: “Nonlinear shell theory in convective description with anisotropic plasticity”, Proc. of “The 6th Conference Shell Structures Theory and Applications”, Gdansk (Poland), 1998

Ulbricht V., Pyttel Th.: „Geschwindigkeitsformulierung der geometrisch und physikalisch nichtlinearen, allgemeinen Schale in konvektiver Beschreibung“, Zeitschrift für Angewandte Mathematik und Mechanik 77, 1997, S1

Pyttel Th.: „Geometrisch und physikalisch nichtlineare Schalentheorie in konvektiver Beschreibung unter Berücksichtigung anisotropen Materialverhaltens“, Dissertation TU-Dresden, 1997

Pyttel Th., Hoogen M.: „Optimierung der Parameter beim Zerteilen von Aluminiumblech“, Tagungsband, MARC Benutzertreffen, 1997

Sähn S., Pyttel Th.: Berechnnung der Kerbwirkungszahlen und Kurzrissverhalten bei zyklischer Belastung, 17. MPA Seminar, Stuttgart, 1991