Veröffentlichungen

Insgesamt mehr als 200 Veröffentlichungen in Fachzeitschriften, Tagungsbänden sowie als Bücher, Buchbeiträge und Patentschriften. Auswahl an Publikationen: 

2020

  • A. Schmidt, I. Kididane, M.A. Schlenz, B. Wöstmann, S. Kolling, P. Schrader: Finite element simulation of fixed dental prostheses made from PMMA – Part I: Experimental investigation under quasi-static loading and chewing velocities. Dental Materials Journal, 2020, accepted.
  • M. Bulla, S. Kolling, E. Sahraei: An experimental and computational study on the orthotropic failure of separators for lithium-ion batteries. Energies 13(17): 4399, https://doi.org/10.3390/en13174399 (pdf), 2020.
  • M. Drass, P.A. Du Bois, J. Schneider, S. Kolling: Pseudo-elastic cavitation model: part I - finite element analyses on thin silicone adhesives in façades. Glass Structures & Engineering, https://doi.org/10.1007/s40940-019-00115-4, Volume 5, pp. 41-65, 2020.
  • A. Rühl, S. Kolling, J. Schneider: A transparent three-layered laminate composed of poly(methyl methacrylate) and thermoplastic polyurethane subjected to low-velocity impact. International Journal of Impact Engineering, Volume 136. https://doi.org/10.1016/j.ijimpeng.2019.103419, 2020, in press.
  • A. Schmidt, P. Schrader, K. Frendel, M.A. Schlenz, B. Wöstmann, S. Kolling: Is the assumption of linear elasticity within prosthodontics valid for polymers? – An exemplary study of possible problems. Dental Materials Journal, 2020, accepted.

2019

  • M. Pfeiffer, S. Kolling: A non-associative orthotropic plasticity model for paperboard under in-plane loading. International Journal of Solids and Structures, Volume 166, pp. 112-123, https://doi.org/10.1016/j.ijsolstr.2019.02.012, 2019.
  • C. Brokmann, M. Berlinger, P. Schrader, S. Kolling: Fraktographische Bruchspannungs-Analyse von Acrylglas. Glasbau 2019, ce/papers 3, No. 1, pp. 225-237, https://doi.org/10.1002/cepa.1013, 2019.
  • C. Brokmann, C. Alter, S. Kolling: Experimental determination of failure strength in automotive windscreens using acoustic emission and fractography. Glass Structures & Engineering, https://doi.org/10.1007/s40940-018-0090-9, Volume 4, Issue 2, pp. 229–241, 2019.

2018

  • M. Drass, J. Schneider, S. Kolling: Damage effects of adhesives in modern glass façades: a micro-mechanically motivated volumetric damage model for poro-hyperelastic materials. International Journal of Mechanics and Materials in Design, Volume 14, Issue 4, pp. 591–616, https://doi.org/10.1007/s10999-017-9392-3, 2018.
  • R. Koerver, W. Zhang, L. de Biasi, S. Schweidler, A.O. Kondrakov, S. Kolling, T. Brezesinskic, P. Hartmann, W.G. Zeier, J. Janek: Chemo-mechanical expansion of lithium electrode materials - On the route to mechanically optimized all-solid-state batteries. Energy & Environmental Science, Volume 11, Issue 8, pp. 2142-2158, https://doi.org/10.1039/C8EE00907D, 2018.
  • M. Drass, G. Schwind, J. Schneider, S. Kolling: Adhesive connections in glass structures - part II: material parameter identification on thin structural silicone. Glass Structures & Engineering, Volume 3, Issue 1, pp. 55–74, https://doi.org/10.1007/s40940-017-0048-3, 2018.
  • M. Drass, G. Schwind, J. Schneider, S. Kolling: Adhesive connections in glass structures - part I: experiments and analytics on thin structural silicone. Glass Structures & Engineering, Volume 3, Issue 1, pp. 39–54, https://doi.org/10.1007/s40940-017-0046-5, 2018.
  • M. Drass, V.A. Kolupaev, J. Schneider, S. Kolling: On cavitation in transparent structural silicone adhesive: TSSA. Glass Structures & Engineering, Volume 3, Issue 2, pp. 237–256, https://doi.org/10.1007/s40940-018-0061-1, 2018.
  • M. Drass, J. Schneider, S. Kolling: Novel volumetric HELMHOLTZ free energy function accounting for isotropic cavitation at finite strains. Materials & Design, Volume 138, pp. 71–89, https://doi.org/10.1016/j.matdes.2017.10.059, 2018.

2017

  • A. Rühl, S. Kolling, J. Schneider: Characterization and modeling of poly(methyl methacrylate) and thermoplastic polyurethane for the application in laminated setups. Mechanics of Materials, Volume 113, pp. 102–111, https://doi.org/10.1016/j.mechmat.2017.07.018, 2017.
  • C. Alter, S. Kolling, J. Schneider: An enhanced non-local failure criterion for laminated glass under low velocity impact. International Journal of Impact Engineering, Volume 109, pp. 342–353, https://doi.org/10.1016/j.ijimpeng.2017.07.014, 2017.
  • S. Mattiello, S. Kolling, C. Heiliger: Kinetic Monte Carlo simulations of fluorine and vacancies concentration at the CeO2(111) surface. Modelling and Simulation in Materials Science and Engineering, Volume 25, Number 6, pp. 065009, http://stacks.iop.org/0965-0393/25/i=6/a=065009, 2017.

2016

  • A. Rühl, S. Kolling, V. Mende, B. Kiesewetter: Computational design of a heated PMMA window validated by infrared thermography. Glass Structures & Engineering, Volume 1(2): 375-383, https://doi.org/10.1007/s40940-016-0004-7, 2016.
  • S. Mattiello, S. Kolling, C. Heiliger: Surface vacancies concentration of CeO2(111) using kMC simulations. Modelling and Simulation in Materials Science and Engineering, Volume 24, Number 1, pp. 015011, http://stacks.iop.org/0965-0393/24/i=1/a=015011, 2016.
  • V. Müller, B. Brylka, F. Dillenberger, R. Glöckner, S. Kolling, T. Böhlke: Homogenization of elastic properties of short-fiber reinforced composites based on measured microstructure data. Journal of Composite Materials, Volume  50(3):297-312, 2016.
  • R. Gloeckner, S. Kolling, C. Heiliger: A Monte-Carlo algorithm for 3D fibre detection from microcomputer tomography. Journal of Computational Engineering, vol. 2016, Article ID 2753187, http://dx.doi.org/10.1155/2016/2753187, 9 pages, 2016.

2015-2009

  • C. Alter, G. Manthei, S. Kolling, J. Schneider: Lokalisierung des initialen Versagens bei Verbundsicherheitsglas unter stoßartiger Belastung. Stahlbau 84(S1):433-442, https://doi.org/10.1002/stab.201590099, 2015.
  • S. Kolling, S. Frik, F. Becker, F. Kunkel: Anisotropic behaviour of thermoplastics due to injection moulding. Kunststoffe im Automobilbau, VDI-Verlag Düsseldorf, ISBN 978-3-18-234322-6, Seite 281-293, 2012.
  • S. Kolling, J. Schneider, N. Gebbeken, M. Larcher, C. Alter, J. Kuntsche: Deformations- und Bruchverhalten von Verbundsicherheitsglas unter dynamischer Beanspruchung. Stahlbau, 81(3):219-225, 2012.
  • M. Timmel, M. Kaliske, S. Kolling, R. Mueller: On configurational forces in hyperelastic materials under shock and impact. Computational Mechanics 47(1):93-104, 2011.
  • S. Kolling, M. Larcher: Simulation von Verbundsicherheitsglas unter stoßartiger Belastung. Universität der Bundeswehr München, Berichte aus dem Konstruktiven Ingenieurbau 10/6: "Festschrift zum 60. Geburtstag von Univ.-Prof. Dr. Ing. Ingbert Mangerig", ISSN 1431-5122, Seite 231-238, 2010.
  • M. Timmel, M. Kaliske, S. Kolling: Modelling of microstructural void evolution with configurational forces. Zeitschrift für Angewandte Mathematik und Mechanik ZAMM, Volume 89 Issue 8, pp. 698-708, 2009.
  • S. Kolling, I. Mangerig: On the computation of a generalised J-integral and its application to the durability of steel structures. In S. Hiermeier (Ed.): Predictive modeling of dynamic processes, Springer Verlag, pp.121-131, 2009.

bis 2008

  • V.A. Kolupaev, S. Kolling, A. Bolchoun, M. Moneke: A limit surface formulation for plastically compressible polymers. Mechanics of Composite Materials, 43(3):1-18, 2007.
  • M. Timmel, M. Kaliske, S. Kolling, R. Mueller: A micromechanical approach to simulate rubberlike materials with damage. Computers, Materials and Continua, 5(3):161-172, 2007.
  • S. Kolling, P.A. Du Bois, D.J. Benson, W.W. Feng: A tabulated formulation of hyperelasticity with rate effects and damage. Computational Mechanics, 40(5):885-899, 2007.
  • M. Timmel, S. Kolling, P. Osterrieder, P.A. Du Bois: A finite element model for impact simulation with laminated glass. International Journal of Impact Engineering, 34(8):1465-1478, 2007.
  • S. Kolling, R. Mueller, D. Gross: On the interaction between an edge dislocation and a coherent precipitate in anisotropic materials. Computational Materials Science, 39(4):829-835, 2007.
  • P.A. Du Bois, S. Kolling, M. Koesters, T. Frank: Material behaviour of polymers under impact loading. International Journal of Impact Engineering, 32(5):725-740, 2006.
  • S. Kolling, R. Mueller: On configurational forces in short-time dynamics and their computation with an explicit solver. Computational Mechanics, 35(5):392-399, 2005.
  • F. Schneider, B. Sonntag, S. Kolling: Numerische und experimentelle Untersuchung des Tragverhaltens einer Verbundsicherheitsglasscheibe unter Berücksichtigung des gerissenen Zustands. Der Bauingenieur, 79(11/2004):516-522, 2004.
  • P.A. Du Bois, S. Kolling, W. Fassnacht: Modelling of safety glass for crash simulation. Computational Materials Science, 28(3/4):675-683, 2003.
  • S. Kolling, R. Mueller, D. Gross: A computational concept for the kinetics of defects in anisotropic materials. Computational Materials Science, 26:87-94, 2003.
  • S. Kolling, R. Mueller, D. Gross: The influence of elastic constants on the shape of an inclusion. International Journal of Solids and Structures, 40(17):4399-4416, 2003.
  • D. Gross, S. Kolling, R. Mueller, I. Schmidt: Configurational forces and their application in solid mechanics. European Journal of Mechanics - A/Solids, 22(5):669-692, 2003.
  • S. Kolling, H. Baaser, D. Gross: Material forces due to crack-inclusion interaction. International Journal of Fracture, 118(3):229-238, 2002.
  • D. Gross, R. Mueller, S. Kolling: Configurational forces - morphology evolution and finite elements. Mechanics Research Communications, 29(6):529-536, 2002.
  • R. Mueller, S. Kolling, D. Gross: On configurational forces in the context of the finite element method. International Journal for Numerical Methods in Engineering, 53:1557-1574, 2002.
  • S. Kolling, D. Gross: Simulation of microstructural evolution in materials with misfitting precipitates. Journal of Probabilistic Engineering Mechanics, 16(4):313-322, 2001.